6. High-Energy and Accelerator Physics, Physics of High-Temperature Plasma

BYPASS MODULE FOR SHUNTING OF THE ELECTROMAGNETS FOR ACCELERATORS AND STORAGE RING

Oleg V. Belikov
1. Budker Institute of Nuclear Physics Novosibirsk, Russia Federation
2. Novosibirsk State University Novosibirsk, Russian Federation
O.V.Belikov@inp.nsk.su
Anatoliy S. Medvedko
1. Budker Institute of Nuclear Physics SB RAS Novosibirsk, Russian Federation
2. Novosibirsk State University Novosibirsk, Russian Federation
A.S.Medvedko@inp.nsk.su
Victor R. Kozak
1. Budker Institute of Nuclear Physics SB RAS Novosibirsk, Russian Federation
kozak@inp.nsk.su
The material was received by the Editorial Board: 22.05.2009
The bypass module was developed for correction of magnetic field in the bending magnet gap through partially taking current away from the coil. The SHUNT-20 bypass module that is presented in this work is able to take a current of up to 20A away from the coil of electromagnet. The device developed allows both recuperation of the taken energy to the main power source of the electromagnet and energy dump to a ballast load. The bypass module is remotely monitored and controlled through a CAN-bus.

Keywords:
correction of magnetic field in the electromagnet, recuperation, flyback converter.
УДК 621.311.6.072

BYPASS MODULE FOR SHUNTING OF THE ELECTROMAGNETS FOR ACCELERATORS AND STORAGE RING
References: Belikov O. V., Medvedko A. S., Kozak V. R. BYPASS MODULE FOR SHUNTING OF THE ELECTROMAGNETS FOR ACCELERATORS AND STORAGE RING. Vestnik NSU. Series: Physics. 2009, vol. 4, no. 3. P. 63–66 (in Russ.). DOI: 10.54362/1818-7919-2009-4-3-63-66