6. Quantum Optics, Quantum Electronics

CEAC CONTROLLERS FAMILY FOR CONTROL OF POWER SUPPLIES OF ACCELERATOR FACILITIES

Oleg V. Belikov
1. Budker Institute of Nuclear Physics Novosibirsk, Russia Federation
2. Novosibirsk State University Novosibirsk, Russian Federation
O.V.Belikov@inp.nsk.su
Vladimir F. Veremeenko
1. Budker Institute of Nuclear Physics SB RAS Novosibirsk, Russian Federation
2. Novosibirsk State University Novosibirsk, Russian Federation
Victor R. Kozak
1. Budker Institute of Nuclear Physics SB RAS Novosibirsk, Russian Federation
kozak@inp.nsk.su
The material was received by the Editorial Board: 26.07.2012
Accelerator facilities includes hundreds electromagnets which should be powered by power supplies. These power supplies should be tune in wide range with high accuracy. Here are described a device set (CEAC family) for this application. These controllers are incorporated in end equipment and provide required parameters. Balance between general purpose functions and accelerator specified functions allows to minimize number of device models and to extend application field. Power supply controllers are connected with control network by CANbus line.

Keywords:
power supplies, accelerators, control system, controllers, CANbus. 
УДК 621.311.6.072

CEAC CONTROLLERS FAMILY FOR CONTROL OF POWER SUPPLIES OF ACCELERATOR FACILITIES
References: Belikov O. V., Veremeenko V. F., Kozak V. R., Medvedko A. S., Kuper E. A. CEAC CONTROLLERS FAMILY FOR CONTROL OF POWER SUPPLIES OF ACCELERATOR FACILITIES. Vestnik NSU. Series: Physics. 2012, vol. 7, no. 4. P. 43–48 (in Russ.). DOI: 10.54362/1818-7919-2012-7-4-43-48