Slotted Channel as a Gasdynamical Source of Ignition and Flame Stabilization in the Supersonic Combustion Chamber

Read more The original scheme of flame stabilization in the channel at close to cocurrent fuel supply for the fuel combustion at a high supersonic speed has been designed. Such solution provides high temperature of a stream in a zone of fuel-air mixture formation. Computational and experimental investigations of self-ignition and combustion of hydrogen were carried out in the model of combustor chamber with slotted channel (gasdynamical source of ignition) at Mach numbers 3.7 and 5.8 at the entrance. Tests have been performed in hot-shot wind tunnel IT-302M of ITAM SB RAS in a mode of the attached pipe. Numerical study has been performed on the basis of solving the full averaged Navier-Stokes equations, supplemented k-Q SST turbulence model. Configuration of the slotted channel has been designed with two variants of exit nozzle: with and without geometrical throat. It has been established that at the channel entrance two vortexes with high temperature have been appeared. Temperature has been keeping high in the channel with geometrical throat and at blocking of the slotted channel without throat. It was found that uniform subsonic stream in the channel with geometrical throat has been realized. The stream in the slotted channel without geometrical throat keeps supersonic but Mach number was lower than in the main channel. The structure of the flow at the slotted channel exit is significantly differs for this both cases.

Keywords:
supersonic speed, channel, self-ignition, flame stabilization
УДК 533.6.011.5; 533.6.072

Slotted Channel as a Gasdynamical Source of Ignition and Flame Stabilization in the Supersonic Combustion Chamber